How to Make Shuttering Board by plywood and Battens

Making a shuttering board using plywood and battens involves several steps. Here’s a general guide based on the search results:

  1. Materials Preparation: Gather your materials including plywood sheets, timber battens, nails, and a hammer. The dimensions of the plywood and battens will depend on the size of the shuttering board you want to create.

  2. Cutting the Plywood and Battens: Cut the plywood and battens to the necessary sizes. The plywood will form the main body of the shuttering board, while the battens will provide additional support.

  3. Assembling the Shuttering Board: Lay out the plywood and position the battens at regular intervals across the back. The battens should run perpendicular to the longer edge of the plywood.

  4. Securing the Battens: Using nails, secure the battens to the plywood. Ensure they are fixed firmly to prevent any movement during the casting process.

  5. Finishing Touches: Check the assembled shuttering board for any sharp edges or protruding nails. These could potentially damage the concrete or pose a safety risk.

Remember, this is a simplified guide. The actual process can be more complex depending on the specifics of the project and local building regulations. Always consult with a qualified engineer or construction professional to ensure safe and effective practices.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
× How can I help you?