Because the wrong thickness doesn’t just waste material — it ruins your finish. “The board didn’t break. But it bent — just enough to ruin the slab’s edge.” It happens when you use 6 mm where you needed 12 mm. Or go with 16 mm when you don’t need the weight. Thickness isn’t just about …
On paper, most shuttering boards seem perfect. They promise strength, smooth finish, and high repetition. But construction sites aren’t paper. They’re hot, wet, dusty, and unpredictable. And that’s where most boards start failing. Because they’re not made for what actually happens on-site. It’s Not the Mix. Not the Labour. It’s the Board. Plywood soaks up …
Why Most Shuttering Boards Don’t Survive Real Construction Sites? Read More »
Across construction sites in India, plastic-coated plywood sheets are often positioned as an “improved” alternative to conventional shuttering ply. The logic sounds reasonable: add a plastic layer, protect the surface, extend the board’s life. But in practice, surface coating solves only a fraction of the problems that cause shuttering boards to fail. As construction cycles …
For decades, shuttering plywood has been the default choice on Indian construction sites. It’s familiar, inexpensive upfront, and easy to source. But with rising project timelines, tighter quality expectations, and unpredictable weather cycles, contractors are increasingly finding plywood to be the weakest link in the formwork chain. Two forces create the biggest problems: moisture and …
PAC® Shuttering Material stands out as the top choice for RCC and slab work in 2026, offering unmatched durability, reusability, and eco-friendliness from Rajratan Industries, India’s leading shuttering board manufacturer and nationwide supplier. As a registered trademark of Rajratan Industries, this plastic aluminum composite board replaces plywood, steel, and PVC with superior performance in formwork …
Why PAC® Shuttering Material Is the Perfect Fit for RCC and Slab Work in 2026 Read More »
For years, the conversation around shuttering materials has been stuck between plywood vs. steel vs. plastic. Sustainability claims are often repeated without context — plastic is recyclable, plywood is natural, steel lasts longer.None of these statements mean anything unless we look at actual environmental impact across the full construction cycle. This article breaks down the …
Across India’s construction sites—from fast-growing tier-2 cities to large-scale infrastructure works—plastic shuttering boards are finally getting the attention they deserve. And yet, despite their rising adoption, misconceptions continue to distort how builders evaluate them. Most blogs on this topic repeat the same tired comparisons.This article does not. Instead, it cuts through the noise and focuses …
Addressing Common Misconceptions About Plastic Shuttering Boards Read More »
For decades, plywood and steel Shuttering have dominated concrete formwork — trusted, familiar, and widely used. But with rising timber costs, quality inconsistencies, and maintenance-heavy processes, the industry is beginning to question if tradition is holding it back. Enter PAC® (Plastic Aluminium Composite) Shuttering Boards — a next-generation solution designed to outlast and outperform conventional …
The Definitive Guide to PAC® Shuttering Boards: Debunking Common Industry Myths Read More »
Choosing the right materials is one of the most critical decisions in any construction project. For formwork, the choice has traditionally been between plywood, steel, and more recently, various recycled plastic sheets. However, a new contender, the Plastic Aluminium Composite (PAC®) Board, is gaining significant traction. This blog provides a detailed comparison between generic recycled …
Recycled Sheets vs. PAC® Boards: A Detailed Comparison for Builders Read More »
Slab shuttering, or formwork, is the backbone of any concrete construction project. It’s the temporary mold that holds fresh concrete in place until it gains enough strength to support itself. Choosing the right shuttering board is critical for achieving a smooth finish, ensuring structural integrity, and managing project costs. But with materials like plywood, steel, …
Slab Shuttering: Choosing the Best Material & Removal Time Read More »
