High-rise construction demands formwork that can handle repeated concrete pours without frequent replacement or rework. Conventional timber formwork can require additional labour for stripping, sanding, repairs and replacement after moisture-related damage.
PAC® Shuttering Boards are designed as a Reusable Shuttering Board solution for repeated use, helping contractors improve formwork efficiency while reducing maintenance and replacement requirements.
PAC® vs. Timber: Labour & Reuse
Factor | Timber Formwork | PAC® Shuttering Board |
Reuse potential | 8–12 cycles* | 60–100+ cycles* |
Moisture-related damage | Possible | Designed to resist swelling |
Stripping & maintenance | Higher | Lower |
Secondary rework | Can increase with board damage | Reduced with consistent board condition |
Buyback | Usually unavailable | 40% buyback on eligible boards |
*Actual repetitions depend on grade, handling and site conditions.
How PAC® Can Reduce Project Costs
The biggest advantage of reusable formwork is not just the purchase price. It is the cost per use.
When a board can be reused across multiple pours, its initial cost is distributed over a longer lifecycle. Reduced sanding, repairs and replacement can also lower labour requirements.
For example, if a ₹2,560 board is reused 60 times, the basic material cost is approximately ₹42.67 per use, before considering buyback or other project costs.
40% Buyback Program
Eligible PAC® Shuttering Boards can be returned under Rajratan’s 40% buyback program.
This means part of the original investment can be recovered and adjusted against future purchases, reducing the effective acquisition cost for subsequent formwork cycles.
Suitable for High-Rise Construction
PAC® Shuttering Boards can be considered for:
- High-rise slabs
- Columns and beams
- Basement construction
- RCC walls
- Repetitive formwork
- Commercial and industrial projects
The correct board thickness and support arrangement should always be selected according to the project’s structural and formwork requirements.
Conclusion
For high-rise projects, formwork costs are influenced by much more than the initial board price. Reuse, labour, maintenance, replacement and end-of-life value all contribute to the total cost.
PAC® Shuttering Boards offer a reusable alternative to conventional timber formwork, with moisture resistance, repeated-use potential and a 40% buyback program that can improve long-term formwork economics.
Looking to calculate the right board quantity and cost per use for your project? Contact Rajratan for a project-specific quotation.
